Enhance UltraRAID controllers support graphic user interface to manage the system. Just connect LAN cable, open the browser and type in the IP address, and click any function at the first time; it will pop up a dialog to authenticate.
|
| |
Three Indicators (at the top-right corner) |
 |
 |
 |
| Voltage light |
Temperature light |
RAID light |
|
| |
Quick install |
It is easy to use "Quick install" function to create a volume. Depend on how many physical disks or how many residual spaces on created VGs are free, the system will calculate maximum spaces on RAID levels 0/1/3/5/6.
|
|
System Configuration |
The "System config" selection is the tool to setup your system, such as "System name", "IP address", "SCSI Bus Setting", "Password", "Date", "Mail", "SNMP" and view "Event log".
|
System Name: |
System name for identification |
IP Address: |
Internet Protocol (IP) address for remote administraion |
SCSI: |
SCSI BUS Setting |
Password: |
Administrator's password |
Date: |
System time for event log |
Mail: |
Alert by e-mail |
SNMP: |
Alert via Simple Network Management Protocol (SNMP) |
Event log: |
System event log to record critical events |
|
|
Volume Configuation |
The "Volume config" selection is for the setup of volume configurations including "Physical disk", "Volume group", "User data volume", "Cache volume" and "Logical unit" functions.
|
Physical Disk: |
Hard disks to store data |
Volume Group: |
Sets of physical disks with RAID functions |
User Data Volume: |
Slices of volume groups |
Cache Volume: |
Dedicated or global cache space for user data volume |
Logical Unit: |
Target volumes for hosts access |
|
|
Enclosure Management |
The "Enclosure management" function allows managing enclosure information including "SAF-TE config", "Voltage & Temperature", "S.M.A.R.T." and "UPS" functions.
|
SAF-TE Config: |
SAF-TE settings on SCSI bus |
Voltage & Temperature: |
System monitored voltage and temperature |
S.M.A.R.T: |
Self-monitoring analysis and reporting technology for physical disks |
UPS: |
Uninterruptible power supply |
|
|
System Maintenance |
The "Maintenance" function allows operation of the system functions including "Upgrade" to the latest firmware, "Info" to show the system version and "Shutdown" to either reboot or shutdown the system.
|
Upgrade: |
Remote upload firmware |
Info: |
System version |
Reset to Default: |
Reset to factory default |
Shutdown: |
Reboot or shutdown system |
|
|
Logout |
For security reason, "Logout" function will allow logout while none is operating the system. Relogin the system by entering username and password.
|
866.537.5140 | 
Contact Us | 
Assembled in USA